Brands / Raynor / Program Your Car
How to program your car to a Raynor opener
This works for every Raynor opener with a coloured Learn button. It takes about a minute. You'll need a step ladder.
- Program the car first: hold your working remote 1 to 3 inches from the car's garage buttons, then press and hold the car button and the remote button together until the car's indicator light flashes quickly.
- Go to the opener and press and release the Learn button. You have 30 seconds.
- Back in the car, press and hold the garage button you programmed for 2 seconds, then let go. Repeat up to three times until the door moves.
Yellow Learn button and a car older than about 2012? The car may not support Security+ 2.0. A HomeLink compatibility bridge (LiftMaster 855LM) fixes it.
After programming: test the safety reverse. Put a piece of wood or a roll of paper towels flat under the door and close it. The door should touch it and go back up. If it doesn't, don't use the opener until it's fixed.